Robotics

Robotics

Robotics

Active filters

  • CHF8.25

    The HD-1900A analog servo from Power HD is a great general-purpose micro servo. Servo horns and associated hardware are included.

  • CHF22.95

    The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this tiny, versatile device will deliver.

    Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).

  • CHF34.95

    This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 17 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.

  • CHF4.95

    These tall brackets offer an easy and convenient mounting solution for our mini plastic gearmotors. The white plastic bracket securely clasps around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.

  • CHF149.90

    Max:Bot is an entry-level DIY robot based on a micro:bit board.

    It is targeted for 8+ years old kids to learn about robotics.

    10+ electronic modules, including motors, speakers, line trackers, distance sensors, gesture sensor, etc.

    Extendable with 50+ DFRobot Boson modules.

  • CHF19.95

    Magnet mount antenna for GPS modules operating at 3V.

    Designed for used with automobiles - the magnet will hold the antenna in place at speeds greater than 100mph.

    5meter cable terminated with MCX connector.

  • CHF21.95

    Use this motor driver and power distribution board to get your Romi chassis running quickly.

    It offers all of the same features as the smaller Power Distribution board for Romi Chassis — battery contact slots, reverse voltage protection, several power switching options, and easy access to the various power busses — and adds a two-channel motor driver and powerful switching step-down regulator that can supply a continuous 2.5 A at 5 V or 3.3 V. Just add a microcontroller and sensors to complete your Romi robot.

  • CHF14.95

    The DSM44 digital servo from Power HD is a micro servo with digital control electronics for enhanced performance and metal gears for increased durability. It is a great tiny actuator for robotic or RC mechanisms that need to be light, quick, and strong. Servo horns and associated hardware are included.

  • CHF9.95

    This compact programmer can program the Orangutan, Orangutan SV-168, Orangutan LV-168, and Baby Orangutan robot controllers, as well as the 3pi robot, through a USB connection.

    The on-board USB-to-serial adapter allows the unit to look like a serial AVRISP programmer to your programming software. The serial port TX and RX lines are connected to separate pads so that the programmer can also be used as a USB-to-serial adapter.

  • CHF54.95

    The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver.

    Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).

  • CHF64.95

    The RoboClaw motor controllers from Ion Motion Control (formerly Orion Robotics) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 5 A per channel (10 A peak).

  • CHF44.95

    This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. An efficient voltage regulator (5.5 V to 36 V input) and level shifters enable it to power and communicate with a Raspberry Pi.

    This version is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.